It can cut V-groove connected PCB boards, LED aluminum substrates and copper substrates.
It can cut circuit boards with V-groove edge component distance greater than 0.2mm.
It uses cylinder pulling method for cutting, counting, automatic stop function, and safety.
The operator can operate safely and foolproof cutting to ensure that the operator cannot cut the PCB board badly.
The cutter probe uses the plane of the incision, and the board stress is less than 400 microstrain, which will not cause component damage.
The blade replacement cylinder is simple and convenient, which can solve the problem of bad board cutting caused by manual and knife-feeding board cutting machine.
Pneumatic output, solenoid valve control, fast speed.
No vibration and noise during cutting, preventing damage to precision parts.
The machine has a solid structure and is easy to operate, even unskilled personnel can operate it.
PCB boards or thin plates without V-groove design can be customized with trays and anti-fool positioning devices.
The height of the upper and lower knives can be adjusted, and the upper knob adjusts the tool gap according to the thickness of the PCB board to match the thickness between the V-grooves.
Pneumatic and electric lightweight design, built-in positioning sensor, completes the shear stress-free cutting stroke in one go, especially suitable for cutting aluminum substrates.
The fit and wear are adjusted by the knobs for the front and rear sections of the lower knife, without the need for gaskets, reducing the difficulty of tool change and adjustment. The blade can be repeatedly ground, saving the high cost of repurchasing the blade.
There are no bow waves and micro cracks generated when the circular knife is split, so that the wedge-shaped tool can be linearly split, the shear stress is minimized, and sensitive SMD components and even capacitors are not affected, and the potential quality risk of the product is minimized.
The cutting stroke is less than 1mm, and there is absolutely no concern about operational safety. The cutter is made of high-speed steel with precision grinding and can be repeatedly ground and used. It is also suitable for thin plate separation operations without V-CUT.
project | ZM30-P |
Device Name | German cutting PCB board splitter |
Thickness of the split board | 0.3-3.5m |
Working air pressure | 0.5-0.7MPA |
Voltage | AC110-220V |
PCB cutting thickness range | 0.1mm~2.0mm(With V groove） 0.1mm~1.0mm(No V groove) |
Equipment use range | All SMD PCB boards with V-CUT can be used with this machine |
Effective cutting length | 330mm、430mm、530mm |
Device size | 750*450*1200mm、980*500*1250mm、1200*810*1300mm |
Mechanical weight | 160KG、300KG、450KG |
